AR-22 was developed to meet the requirement of an industrial application for a thin soft film general purpose lubricating oil, which provides water displacing and limited anti-rust plus lubricating properties. This formulation will also act as a penetrating oil for ease of loosening rusty metal parts. It works well with both ferrous and non-ferrous metals. It will provide limited resistance for humid atmospheric exposure which can cause corrosion to metal surfaces. This formulation does not contain silicone or CFC materials.
The formula gives a soft film, which gives off a pleasant odour, which is not offensive. It is particularly suitable for indoor application. It is not affected by water and can be used to drive away water on metal surfaces. It will give limited protection against rust, moisture and corrosion by depositing a protective film, which displaces water and moisture and act as a lubricant to the sprayed parts. Suitable for ignition systems, tools, chains, motors, machineries, etc.
| Typical Physical & Chemical Properties | |
|---|---|
|
Specific Gravity (25°C) |
: 0.75 (concentrate) |
|
Flash Point |
: 55 °C (TCC) (concentrate) |
|
Water Displacement |
: Pass |
|
Appearance |
: Transparent oil film |
|
Odour |
: Sweet pleasant |
| Direction of Use |
|---|
|
To achieve better results as a water-displacing agent, spray freely to allow AR-22 to saturate the surfaces. Use extension tube for hard to reach areas. To use as a cleaning and lubricating agent, just spray accordingly using the extension tube for better control of spray.
|
| Caution |
|---|
|
The solvent used in this formulation are flammable. Do not spray near any fire or sparkling point neither store near them or in temperatures above 48°C. Do not swallow, if swallowed call doctor immediately. For skin contact, wash thoroughly with water and soap. Contents under pressure. Do not puncture or incinerate container. Do not use on running or hot engines. Keep out of reach of children. |
