Ejector Pin Lubricant Formula 100

Ejector Pin Lubricant Formula 100

PRODUCT CODE : EP-1

BRAND NAME : Ejector Pin Lubricant Formula 100

ENQUIRY

    Send us your enquiry for Ejector Pin Lubricant Formula 100



    DESCRIPTION :

    Formula 100 was developed specifically as a thin film low speed sliding ejector pin lubricant for the plastic injection molding industries. The application of such a lubricant will eliminate and prevent breakage and seizing of ejector pins. It will help in the reduction of production downtime if machines need to be stopped for the replacement of broken pins.

    PRODUCT PROPERTIES:

    Non-Soiling, Non-Emulsifiable, Non-Staining, Thin-Film Lubrication, Transparent, Colourless, Rust Preventive. Operating Temperature: -20°C to ±130°C.

    Typical Physical & Chemical Properties
    Specific Gravity (25°C)
    : 0.69 (concentrate)
    Flash Point
    : < 0°C (concentrate)
    Appearance
    : Amber, transparent
    Flammability
    : Flammable
    Operating Temperature
    : -20°C to ±130°C in all cases which we have tested even at 230°C mold temperature, Formula 100 would still give lasting lubrication.
    Direction of Use
    1. Make sure that ejector pins are properly cleaned.
    2. From a distance of 5 inches (127mm), spray lightly several times on the pins moving the container from side to side.  To achieve full coverage of lubricant on the pins surfaces, adjust your own spraying distance if possible. Do not spray at one particular spot for too long. Over-spraying will not necessary give better lubrication.
    3. Repeat spraying when necessary.
    4. To clean ejector pins, use Solvent Cleaner Formula 900-B.
    Caution
    Contents under pressure. Do not spray near any fire or sparks. Do not store or expose the container for long duration in places with temperature above 40ºC. Do not pierce or burn the container. Use in well ventilated areas. Avoid breathing the vapor. In case of eye contact, flush immediately with plenty of water. If discomfort persists, see a doctor. Keep out of reach of children.

    our Solutions

       Since 1986, Aerosol Specialists Sdn Bhd has been a trusted manufacturer of high-quality mold release agents and aerosol products for the molding industry, proudly manufacturing over 100 proven formulations, including UL-approved and non-silicone options. Serving customers in Malaysia and exporting to Singapore, China, Thailand, and Taiwan, we source premium raw materials from the US, Europe, and Japan, develop our own formulations, and offer both standard and custom-branded packing. As a dedicated distributor and supplier, we are committed to innovation, safety, and environmental responsibility, delivering solutions that make applications easier and more efficient. Contact us today to discuss how our manufacturing expertise can meet your production needs.