|
|
|
Product > Chain Lubricants > Chain Lubricant Formula 110
|
|
| |
| Chain Lubricant |
PRODUCT CODE : CL-1
BRAND NAME : Chain Lubricant Formula 110
| DESCRIPTION
Formula 110 was developed as a lubricant which can provide long term lubricating action and corrosion protection. It is non-oily, resistant to high pressure, gives high adhesive strength and non-staining. Apply with an extension tube, it can penetrate into hard to reach surfaces. The solvent upon immediate evaporation will result a high adhesive film with lasting lubrication between metal surfaces. This formulation is good for parts, which will subject to extreme pressure and vibration. It is resistant to water, brine and most corrosive acids and alkalis. Formula 110 does not contain CFC's, 111-Trichloroethane or ozone depleting substances. Will not harm painted surfaces.
APPLICATIONS For steering rod heads, exposed gear wheels, chains (inclusive of motorcycle chains), wire cables, sliding guideways, door highes, pulleys, hoists, etc.
| | Typical Physical & Chemical Properties | | Specific Gravity 25°C | : 0.75 (concentrate) | | Flash Point | : < 0 degree C (concentrate) | | Appearance | : Transparent liquid | | Flammability | : Flammable | | Evaporation Rate | : Fast, < 60 seconds at normal room temperature |
| | Direction of Use
Shake the container before use. Spray from a distance of 15-20cm. | Caution
Contents under pressure. Do not spray near any open fire or sprakling point. Do not store or expose the container in places with temperatures above 48 degree C. Do not pierce or burn the container even after used. Use in good ventilated areas. Avoid breathing the vapor. Before discarding the empty can, releasing the can pressure by pressing the actutaor in open space. Do not place the container on running or hot machines or engines. Keep out of reach of children.
|
17 August 2000
| |
|
|
|
Email
to friend 
|
|
| |
|
|
