|
|
|
Product > Silicone Sprays > Silicone Thread Lube and Release P-35
|
|
| |
| Silicone Lubricant |
PRODUCT CODE : P-35
BRAND NAME : Silicone Lubricant
| DESCRIPTION
P-35 is a Silicone Thread Lubricant and Mould Release spray. It is suitable as a general purpose release agent for plastic and rubber moulding. It can be used a thread lubricant helping to prevent thread breakage. The spray is developed to give forceful fine mist spray to prevent soaking of silicone over the sprayed surfaces. P-35 is also good for protecting rubber products that are exposed to sunlight, such as automotive parts like wipers and weather seal. It will also give a good shine on the tyres.
| | Typical Physical & Chemical Properties | | Specific Gravity (25°C) | : 0.73 | | Flash Point | : < 0ºC | | Appearance | : Clear oily liquid | | Flammability | : Flammable (aerosol) | | Operating Temperature | : up to 205ºC | | Evaporation Rate | : Fast immediate drying |
| Direction of Use - Make sure surface is clean and dry.
- Spray evenly from a distance of 10 cm to 20 cm to obtain good coverage.
- Do not overspray. Excessive spraying will not necessarily give better results.
| Caution
Contents under pressure. Do not spray near any fire or sparks. Do not store or expose the container in places with temperature above 48ºC. Do not pierce or burn the container. Use in well ventilated areas. Avoid breathing the vapor and keep out of reach of children.
| | Contains | Dimethyl Polysiloxane
Aliphatic Hydrocarbon
Liquefied Petroleum Gas | CAS No. 63148-62-9
CAS No. Not Available
CAS No. 68476-85-7 | |
2 July 2005.
| |
|
|
|
Email
to friend 
|
|
| |
|
|
