|
|
|
Product > Silicone Sprays > Silicone Spray (Wet) P-34
|
|
| |
| Silicone Lubricant (Wet) |
PRODUCT CODE : P-34
BRAND NAME : Silicone Lubricant (Wet)
| DESCRIPTION
P-34 was developed as an effective slip agent to be used on guillotine tables, folding and collating machines, cutter plates in the paper and printing related industries. It is a blend of lubricant additives in mixed solvents to give a desire drying which promotes good slip property. It is also suitable to be used as a release agent for rubber molding and other elastomeric materials. P-34 does not contain solvent that might attack plastic or painted surfaces. It can be used as a general cleaning liquid for vinyl and hard plastic surfaces removing light grease and oil stain, the silicone will help gives a shinning finish.
| | Typical Physical & Chemical Properties | | Specific Gravity (25°C) | : 0.71 (liquid concentrate) | | Flash Point | : < 0ºC | | Appearance | : Odourless colourless liquid | | Flammability | : Flammable | | Operating Temperature | : up to 205ºC | | Evaporation Rate | : < 1 minute |
| Direction of Use - Make sure surface is clean and dry.
- Spray evenly from a distance of 10 cm to 20 cm to obtain good coverage.
- Do not overspray. Excessive spraying will not necessarily give better results.
| Caution
Contents under pressure. Do not spray near any fire or sparks. Do not store or expose the container in places with temperature above 48ºC. Do not pierce or burn the container. Use in well ventilated areas. Avoid breathing the vapor and keep out of reach of children.
| | Contains | Dimethyl Polysiloxane
Aliphatic Hydrocarbon
Hexane Isomer
Liquefied Petroleum Gas | CAS No. 63148-62-9
CAS No. Not Available
CAS No. 110-54-3
CAS No. 68476-85-7 | |
29 June 2005.
| |
|
|
|
Email
to friend 
|
|
| |
|
|
