Silicone Dry Spray P-33

Home


	Product
	Mold Release Silicone Mold Release Formula 300 UL approved Silicone Mold Release 3S Silicone Mold Release Formula 800 UL approved Silicone Mold Release Formula 600 Non-Silicone Mold Release Formula 700 Non-Silicone Mold Release Formula ER-15 Non-Silicone Mold Release SL-32 Non-Silicone Mold Release Formula 701
	Lubricants Fusing Machinery Cleaner Lubricant AR-22 General Purpose Lubricant Silicone Lubricant
	Adhesive Sprays N Stick Formula 120
	Air Fresheners
	Contact Cleaners Easy Clean Formula 900 Solvent Cleaner Easy Clean Formula 900B Solvent Cleaner Resin Remover Formula 910 Concentrated Purging Compound Spot Remover SP-2 Spot Remover SP-3
	Grease Sprays
	Silicone Sprays Silicone Dry Spray P-33 Silicone Spray (Wet) P-34 Silicone Thread Lube and Release P-35
	Cutting and Tapping
	Anti-Corrosion Anti-Corrosion Preventive AR-118 Green White Anti-Corrosion Agent Formula 119
	Penetrating Oil
	PTFE Lubricants
	Spot Lifting Sprays
	Chain Lubricants Chain Lubricant Formula 110
	Ejector Pin Lubricants Ejector Pin Lubricant Formula 100

	Contract Packing
	New Products
	Distributors

Product > Silicone Sprays > Silicone Dry Spray P-33

Silicone Dry Spray Lubricant

PRODUCT CODE : P-33

BRAND NAME : Silicone Dry Spray Lubricant

DESCRIPTION
A heat stable silicone lubricant formulated for tough job. It is fast drying giving a non-oily film which is suitable for surfaces such as plastic, rubber, metal, glass, painted finished and fabrics (not for polystyrene). This product operates at temperature from -40º to 205ºC. Silicone Dry Spray Lubricant helps to retard corrosion, gives releasing properties, stop squeaking, prevents sticking and binding. It is a odourless, colourless, non-staining, non-greasy and non-wax formulation. Suitable to be used by sealing and packaging equipment operators, use in converters, printers, bookbinders and many industrial uses. It prevents adhesives or sticky materials adhering to equipment. Good for rubber and plastic molding as release agent. Lubricates and prevents rust on cutters, drills, dies, saws and related equipments. Does not contain any CFC materials.

Typical Physical & Chemical Properties
Specific Gravity (25°C)	: 0.70 (liquid concentrate)
Flash Point	: < 0ºC
Appearance	: Clear colourless liquid
Flammability	: Flammable
Operating Temperature	: -40ºC to 205ºC
Evaporation Rate	: Dry to touch in 30 seconds

Direction of Use

Make sure surface is clean and dry.
Spray evenly from a distance of 10 cm to 20 cm to obtain good coverage.
Do not overspray. Excessive spraying will not necessarily give better results.

Caution
Contents under pressure. Do not spray near any fire or sparks. Do not store or expose the container in places with temperature above 40ºC. Do not pierce or burn the container. Use in well ventilated areas. Avoid breathing the vapor and keep out of reach of children.

Contains

Dimethyl Polysiloxane
Isoparaffinic Solvent
Hexane Isomer
Liquefied Petroleum Gas

CAS No. 63148-62-9
CAS No. 64742-48-9
CAS No. 110-54-3
CAS No. 68476-85-7

27 June 2005.

Email to friend