|
|
|
Product > Mold Release > Non-Silicone Mold Release Formula 701
|
|
| |
| NON-SILICONE MOLD RELEASE FORMULA 701 |
PRODUCT CODE : D-4
BRAND NAME : NON-SILICONE MOLD RELEASE FORMULA 701
| DESCRIPTION
Formula 701 is a non-silicone mold releasing agent specially developed for molding of thermoplastics, thermosets and elastomers which are of higher processing temperatures, up to 260°C (500°F). Formula 701 is excellent for processing materials such as acetyl, nylon, vinyl, PVC, phenolic and urethane. The dry film it forms will not pick up dust or dirt. It will not be affected by corrosive reagents. It is fast drying and good for injection molding where clarity and deep draw are important particularly for hard, brittle resins. The formula will also give lubrication in temperature ranging from -50°F to 500°F. The product does not contain any CFC and ODS materials, it is a PTFE based formulation.
For injection molding - it is paintable, fast drying, non-oily surface, will not interfere with bonding, ultrasonic welding compatible, safe on solvent-sensitive plastics.
| PRODUCT PROPERTIES
Paintable, suitable for metal hot stamping, permits ultrasonic welding of plastics parts.
| | Typical Physical & Chemical Properties | | Specific Gravity (25°C Cone) | : 0.76 glee | | Vapor Pressure 25°C | : 5 kg/cm2 | | Flash Point ( Cone ) | : < DoC | | Appearance ( Cone ) | : White transparent solution | | Flammability | : Flammable | | Operating Temperature | : -50°F to 500°F (260°C) | | Evaporation Rate | : < 30 seconds Fast drying |
| Direction of Use - Shake the can before use.
- Spray from a distance of 15cm to 20cm.
- Do not overspray but apply evenly.
| Caution
Contents under pressure. Do not spray near naked flame or sparks. Do not store or expose the container for long duration in places with temperature above 40°C. Do not pierce or burn the container. Use in well ventilated areas.
|
17 August 1993.
| |
|
|
|
Email
to friend 
|
|
| |
|
|
