|
|
|
Product > Mold Release > Silicone Mold Release Formula 800 UL approved
|
|
| |
| Paintable Silicone Mould Release Formula 800 |
PRODUCT CODE : H-55
BRAND NAME : Paintable Silicone Mould Release Formula 800
| DESCRIPTION
Formula 800 uses a paintable silicone as the release agent. It contained an organomodified polysiloxane and uses a non-CFC propellant. The finished product is CFC free. Formula 800 is suitable to be used as a release agent for precision injection and compression molding of rubber materials and plastic polymers.
With proper application, the molded parts can be sent for subsequent processing such as lacquering, metallising or printing. Apart from being a release agent, Formula 800 can also be used as a lubricant for small mechanical parts, such as plastic gears, sewing threads, rubber to metal lubrication and aluminium to steel lubrication.
|  | | | Typical Physical & Chemical Properties | | Specific Gravity (250°C) | : 0.69 | | Flash Point (solvent) | :> O°C, Open Cup | | Appearance | : Clear water white | | Flammability (solvent) | : Flammable | | Operating Temperature | : up to 300°C | | Evaporation Rate | : < 1 minute at room temperature |
| Direction of Use - Make sure the mold surface is clean and dry.
- Spray evenly from a distance of 15 to 20 cm to obtain good coverage.
- Do not overspray.
| Caution
Contents under pressure. Do not spray near any fire or sparkling point. Do not store or expose the container for a long duration in places with temperature above 40°C. Do not pierce or burn the container. Use in good ventilation areas. Avoid breathing the vapor and keep out of reach of children.
|
27 May 2005.
| |
|
|
|
Email
to friend 
|
|
| |
|
|
