|
|
Product > Contact Cleaners > Spot Remover SP-2
|
|
|
Spot Remover | PRODUCT CODE : SP-2 BRAND NAME : Spot Remover | DESCRIPTION Spot Remover is an industrial strength spray on brush off formulation. It is suitable for removing stains, oil, grease without leaving any ring on the substrate. Can be used on wool, cotton, silk, dacron, nylon and synthetic materials. Do not spray on plastic, rubberized fabric or leather. Prevent the spray from falling on varnished or lacquered surfaces. Test on colour fastness before use on coloured fabric. Good to be used on upholstery, slip covers, carpets, wallpaper and clothes. | Typical Physical & Chemical Properties | Specific Gravity (25°C) | : 1.55 (liquid concentrate) | Flash Point | : None (liquid) | Appearance | : Translucent liquid | Flammability | : Not flammable (liquid) | Operating Temperature | : use it in normal temperature | Evaporation Rate | : > 5 minute | | Direction of Use - Shake well before using.
- Hold can and spray from 10 cm to 20 cm from stain spot.
- Let dry completely to a white powder, then brush or vacuum off the powder.
- Repeat cleaning if required.
| Caution Contents under pressure. Do not spray near any fire or sparks. Do not store or expose the container in places with temperature above 48°C. Do not pierce or burn the container. Use in well ventilated areas. Avoid prolonged breathing of vapor or contact with eyes and skin. In case of eye contact, flush immediately with water for at least 15 minutes. If discomfort persists, see a doctor. | Contains: | Chlorinated Hydrocarbon Halogenated Hydrocarbon Silica Liquefied Petroleum Gas | CAS No. Not Available CAS No. Not Available CAS No. 7631-86-9 CAS No. 68476-85-7 | | 13 September 2003. | |
|
|
|
Email
to friend
|
|
|
|
|