|
|
|
Product > Lubricants > Fusing Machinery Cleaner Lubricant
|
|
| |
| Fusing Machinery Cleaner Lubricant |
PRODUCT CODE : # 187
BRAND NAME : Fusing Machinery Cleaner Lubricant
| DESCRIPTION
# 187 is developed to remove adhesive residue from the operating surfaces of fusing machines, irons, belts and presses. It will help to make future cleaning easier and works well as a lubricant. It helps to preserve and minimize further sticking of adhesive onto belts and plates. It contains long lasting silicone polymer to make cleaning easier.
| | Typical Physical & Chemical Properties | | Specific Gravity (25°C) | : 1.25 | | Flash Point | : 240°C (465°F) | | Appearance | : Clear transparent colourless liquid | | Flammability | : Flammable (aerosol) | | Operating Temperature | : Up to 205ºC | | Evaporation Rate | : < 30 seconds |
| Direction of Use - Shake the can before use.
- Spray from a distance of 15cm to 20cm. Allow the liquid to work and soak into residue for 2 minutes before removing residue with soft absorbent cloth.
- Repeat procedure if necessary.
| Caution
Contents under pressure. Do not spray near any fire or sparks. Do not store or expose the container for long duration in places with temperature above 40ºC. Do not pierce or burn the container. Use in well ventilated areas. Avoid breathing the vapor. In case of eye contact, flush immediately with plenty of water. If discomfort persists, see a doctor. Keep out of reach of children.
| | Contents | Halogenated Hydrocarbon
Mineral Oil
Liquefied Petroleum Gas | CAS No. Not Available
CAS No. 8042-47-5
CAS No. 68476-85-7 | |
29 March 2005.
| |
|
|
|
Email
to friend 
|
|
| |
|
|
